![]() In the FTP Settings window, you will need to enter the following information: Here, make sure that the FTP Upload is enabled and we can move on to the FTP Settings. Next, tap on Advanced and select FTP Upload. We’re going to use the mobile application to access the FTP section on the RLC-520A so, enter the Reolink app, select the camera (in case there are more in the list) and enter the Settings section (tap on the cogwheel icon from the top right corner). Access the FTP section on the Reolink camera. Click on Enable FTP File service and you can leave the Port at 21 (the default).Ģ. At the bottom of the page, there should be the Manually Assigned IP around the DHCP list and here, you can select the Client name and the IP that you want to reserve (the NAS should be called Noon Technology Co Ltd).Īfter that, insert the necessary credentials to log into the TerraMaster NAS and from the user interface, select Control Panel > File Service > FTP File Service. It’s not a bad idea to also reserve a static IP address for the NAS and, in the case of an Asus router, it’s a fairly simple process – open the web-based UI, go to LAN (from under Advanced Settings) and select DHCP Server. You will need to access the TNAS software by entering the IP address of the NAS in the URL of any browser – you can find it in the list of the clients from the GUI of your router (most routers have the default IP address either 192.168.1.1 or 192.168.0.1). Enable the FTP File service on the TerraMaster NAS. Check the TerraMaster Nas for the video files.ġ. Note: It is not necessary to insert a microSD card in the Reolink RLC-520A for the FTP method to function. That being said, if an NVR is out of the question and your TerraMaster NAS is just too good to let go, then follow this guide to get everything properly set up.įor this application, I have used a TerraMaster F2-210 equipped with a couple of HDDs (a Seagate IronWolf 2TB and a Seagate IronWolf 4TB in RAID 1) and a Reolink RLC-520A camera that has a built-in motion detection sensor (and a lot more, but for the sake of this article, this is more than enough).įurthermore, I will skip the installation of the software on the TerraMaster NAS (I have written a review of the F2-210 here), as well as the app configuration of the RLC-520A – it’s worth noting that besides the mobile application, you can also use the Reolink Client for Windows or MacOS, but for now, we’re going to use the app. Nevertheless, it’s very much doable and I know that some people (even professionals.) were taken back by the lack of a dedicated application, but there are other means to push the video to the HDDs (or SSDs), such as FTP.Īnd the good news is that the TerraMaster NASes can work as FTP servers and the Reolink cameras as reliable FTP clients, but be aware that FTP is everything but secure (the packet sniffing risks are real and very dangerous). And the answer is yes, you can, but it’s not going to be as simple as with other NAS brands (such as Synology or QNAP). If you got one Reolink camera (or several) and a TerraMaster NAS as your home server, I am fairly sure that your first thought was whether you can use these two devices without needing to go the NVR route.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |